Aastra Ascotel IntelliGate A150 System Manual page 23

Tab. 6 SIP provider configuration: SIP access
Parameter Parameter value
Trunk groups <Name>
Maximum incoming <30...240>
calls
SIP access without <Yes /
accounts
Tab. 7 SIP account configuration
Parameter
Name
Display Name (name
to be displayed)
SIP-ID
User name
Password
Registration required
Registered
Default account
DDI number
'From' field: Type
'From' field: String
See also
More detailed information on SIP access can be found in the "SIP Access
with Ascotel® IntelliGate®" User's Guide (syd-0176, currently available in
English only).
System Interfaces
Remarks
Here the SIP provider is assigned to a new trunk group.
No further calls are routed via this trunk group once the set limit
is reached. This is signalled to the caller by means of the conges-
tion tone.
No> This parameter has to be set to
of systems. The parameter can only be configured if no accounts
are assigned to the SIP provider.
Parameter value
<Name>
<String>
<Number>
<Name>
<Password>
<Yes / No>
<Yes / No>
<Yes / No>
<DDI No.>
<SIP ID / Direct dialling
number / System CLIP /
User defined>
<String>
Interfaces and Terminals as of I7.8
Remarks
Name of the SIP account
Some providers require this entry. A name or a number such
as the SIP ID is entered here.
Identifier of this account with the SIP provider. This is the
access number of the account which is then linked with a
direct dialling number in the PBX.
This parameter must be specified at all times.
User name of the SIP account with the SIP provider.
This parameter is to be specified only if the SIP provider
requires authentication.
Password of the SIP account with the SIP provider.
This parameter is to be specified only if the SIP provider
requires authentication.
If this parameter is set on Yes, the SIP account will attempt to
register with the provider. The SIP provider is then informed
about the SIP user's current location.
Status field
The default account allows users without SIP account to make
calls via the SIP trunk.
The DDI number with which the SIP-ID is to be linked is
entered in this field. The field can be left blank if the SIP-ID
corresponds to the DDI number.
Specifies what is entered in the definable part of the 'From'
field for outgoing calls.
User-definable character string in the 'From' field for outgo-
ing calls.
Yes to enable the SIP networking
23