Point-to-Point Connection without Direct Dial
Without direct dialling in, only one call number is available. The individual PBX us-
ers can only be reached indirectly via the number.
This variant is suitable above all for systems with primarily outgoing traffic.
NT1:
Network Terminal
U/T:
ISDN reference point
AD2: digital terminal interface AD2
S:
terminal interface S
a/b:
analogue terminal interface
Fig. 5
Several basic accesses with line group in point-to-point configuration, without direct dial
number
Note:
Do not connect any terminals between the NT1 and the PBX.
System Interfaces
Interfaces and Terminals as of I7.8
15