HIKVISION DS-2SE7C43C432MW-AEB User Manual page 73

7. Optional: Set the minimum size and the maximum size for the target to improve detection
accuracy. Only targets whose size are between the maximum size and the minimum size trigger
the detection.
1) Click Max. Size, and drag the mouse on live image. If you want to change the size, click the
button and draw again.
2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the
button and draw again.
8. Set detection parameters.
Sensitivity
Threshold
Detection
Target
9. Click Save.
10. Repeat above steps to set other detection areas.
11. Set arming schedule. See Set Arming Schedule .
12. Set linkage method. See Linkage Method Settings .
TandemVu PTZ Camera User Manual
It stands for the sensitivity of detecting an target. The higher the value of
sensitivity is, the more easily the target is detected.
Threshold stands for the time of the target loitering in the region. If the time
that she/he stays in the region exceeds the threshold, the alarm is triggered.
You can specify the object type, and the device only detects the selected
type of objects.
Figure 8-4 Draw Area
61