Set Mac Address Filter; Set Https - HIKVISION DS-2SE7C43C432MW-AEB User Manual

Steps
1. Go to Configuration → System → Security → IP Address Filter .
2. Check Enable IP Address Filter.
3. Select the type of IP address filter.
Forbidden IP addresses in the list cannot access the device.
Allowed Only IP addresses in the list can access the device.
4. Edit the IP address filter list.
Add Add a new IP address or IP address range to the list.
Modify Modify the selected IP address or IP address range in the list.
Delete Delete the selected IP address or IP address range in the list.
5. Click Save.

11.13.3 Set MAC Address Filter

MAC address filter is a tool for access control. You can enable the MAC address filter to allow or
forbid the visits from the certain MAC addresses.
Steps
1. Go to Configuration → System → Security → MAC Address Filter .
2. Check Enable MAC Address Filter.
3. Select the type of MAC address filter.
Forbidden MAC addresses in the list cannot access the device.
Allowed Only MAC addresses in the list can access the device.
4. Edit the MAC address filter list.
Add Add a new MAC address to the list.
Modify Modify the selected MAC address in the list.
Delete Delete the selected MAC address in the list.
5. Click Save.

11.13.4 Set HTTPS

HTTPS is a network protocol that enables encrypted transmission and identity authentication,
which improves the security of remote access.
Steps
1. Go to Configuration → Network → Advanced Settings → HTTPS .
2. Check Enable.
3. Optional: Check HTTPS Browsing to access the device only via HTTPS protocol.
4. Select a server certificate.
TandemVu PTZ Camera User Manual
91