Set Power Off Memory; Set Ptz Priority - HIKVISION DS-2SE7C43C432MW-AEB User Manual

7) Repeat the steps above to set other privacy masks.
3. Select panoramic channel.
1) Check Enable Privacy Masks.
2) Draw the area.
Draw Area
Stop Drawing
3) Click Add.
It will be listed in Privacy Mask List.
4) Edit Name, Type on your demand.
5) Click Save.
6) Repeat the steps above to set other privacy masks.

4.10 Set Power Off Memory

This function can resume the previous PTZ status of device after it restarting from a power-off.
Steps
1. Go to Configuration → PTZ → Basic Settings .
2. Select Resume Time Point. When the device stays at one position for the set resume time point
or more, the position is saved as a memory point. The device returns to the last memory point
when it restarts.
3. Click Save.

4.11 Set PTZ Priority

The function can set the PTZ priority of different signals.
Steps
1. Go to Configuration → PTZ → Prioritize PTZ .
2. Set the priority signal and delayed time.
Network
The network signal controls the device with priority.
RS-485
The RS-485 signal controls the device with priority.
Delay
TandemVu PTZ Camera User Manual
Click Draw Area and drag the mouse in live
image. You can drag the corners of the red
rectangle to adjust the area.
ClickStop Drawing after drawing area.
23