Set Cloud Storage; Video Recording; Record Automatically - HIKVISION DS-2SE7C43C432MW-AEB User Manual

Select file system protocol according to the operation system.
Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is
selected.
3. Click Test to check whether the network disk is available.
4. Click Save.

7.1.4 Set Cloud Storage

It helps to upload the captured pictures and data to the cloud. The platform requests picture
directly from the cloud for picture and analysis. The function is only supported by certain models.
Steps
Caution
If cloud storage is enabled, the pictures are stored in the cloud storage server preferentially.
1. Go to Configuration → Storage → Storage Management → Cloud Storage .
2. Check Enable Cloud Storage.
3. Set basic parameters.
Protocol Version
Server IP
Serve Port
User Name and
Password
Picture Storage
Pool ID
4. Click Test to test the configured settings.
5. Click Save.

7.2 Video Recording

This part introduces the operations of manual and scheduled recording, playback, and
downloading recorded files.

7.2.1 Record Automatically

This function can record video automatically during configured time periods.
TandemVu PTZ Camera User Manual
The protocol version of the cloud storage server.
The IP address of the cloud storage server. It supports IPv4 address.
The port of the cloud storage server. 6001 is the default port and you
are not recommended to edit it.
The user name and password of the cloud storage server.
The ID of the picture storage region in the cloud storage server. Make
sure storage pool ID and the storage region ID are the same.
50