Keithley S46 Instruction Manual page 28

S46/S46T Microwave Switch System Instruction Manual
Input/output connections
Figure 2-4
and RELAY 1 through RELAY 8. RELAY A through RELAY B have up to six inputs and
one output (depending on relay pole configuration). RELAY 1 through RELAY 8 each
have two inputs and one output.
Figure 2-4
Relay input/output connections
Transfer switch (XFER)
Up to four transfer switches (DPDT) can be located in Relay positions A–D. The transfer
switch cross-connects two input ports with two output ports. When using transfer
switches, make sure to note the operational differences (see
shows input and output connections for both RELAY A through RELAY D,
Connections
Section 3).
S46-901-01 Rev. C / January 2006
2-7