Picture Adjust - Marantz VP-10S1 User Manual

Picture Adjust

You can adjust picture quality to your liking in each of the picture modes and save those adjustments in memory.
This projector makes 3 memory indexes (1, 2 and 3) available for each picture mode.
❖
For a video signal input, the following adjustments can be made.
Menu
Picture Adjust Contrast
Setting Brightness
System Color
Display Sharpness
Config Tint
Trigger 2 Noise Reduction
Preset Color Temp.
Fine Menu
Note:
• Some menu items cannot be adjusted depending on the input signal.
• If default is selected as the index, picture quality cannot be adjusted. To adjust picture quality, select an index from 1 to 3.
See "Preset" ( pg. 34)
❖
Contrast
Contrrast 50
❖
Color Temp. (Color Temperature)
1 : Red comes out strong. Color temperature is about 5250 K.
2 : Red is mildly strong. Color temperature is about 5800 K.
3 : Normal. Color temperature is about 6500 K.
4 : Blue is mildly strong. Color temperature is about 7500 K.
5 : Blue comes out strong. Color temperature is about 9300 K.
Color Temp. 2
❖
Adjusting Picture Quality
1. Select the desired menu item and press the
1 2
2.
Use the and buttons to adjust the item.
3
3. Press the button to enter the setting and return to menu item selection.
ENTER
26
Standard 1
50
44
58
7
0
0
3
2
button. An adjustment bar appears on the screen.
3.
PATTERN INPUT
1, 2
Menu item
Contrast
Brightness
Color
Sharpness
Tint
Noise Reduction
Color Temp. (Color Temperature)
MENU V-MUTE
3.
ENTER
1, 2
INPUT ASPECT
Adjustment range
0 100
Weak Strong
0 100
Dark Bright
0 100
Light Deep
0 31
Soft Sharp
R50 G50
Purple Green
0 63
Weak Strong
1 2 3 4 5
Red Blue