Trigger 2 - Marantz VP-10S1 User Manual

– Reset All
Resets all settings to their factory defaults except the user-selected gamma curve and the lamp life counter. When you select
"Yes", the following message appears on the screen.
Reset All ?
Yes
Select "Yes" and press the ENTER button.
❖
How to Operate the Config Menu
1.
Select the desired menu item and press the
The setting item will appear on the screen.
3 4
2.
Use the and buttons to set the item.
1
3. Press the button to enter the setting and return to menu item selection.
ENTER
2

Trigger 2

You can turn the trigger signal output from the TRIG. 2 jack on (12 V output)/off (no output) for each of the aspect modes: Full,
Normal, Zoom and Through. This trigger signal can be used to automatically match the screen aspect mode to projector operation,
though it requires a powered dual aspect screen.
On: 12 V output
Off: No output
Menu
Picture Adjust Full
Setting Normal
System Through
Display Zoom
Config
Trigger 2
Preset
❖
How to Operate the Trigger 2 Menu
1.
Select the desired menu item and press the
The setting item will appear on the screen.
3 4
2.
Use the and buttons to set the item.
1
3. Press the button to enter the setting and return to menu item selection.
ENTER
2
No
2
button.
MENU
PATTERN INPUT
1,3
INPUT
Standard 1
On
On
On
On
2
button.
MENU
PATTERN INPUT
1,3
INPUT
V-MUTE
2.
ENTER
1, 3
ASPECT
V-MUTE
2.
ENTER
1, 3
ASPECT
33