Thx ultra2 digital / thx select dolby digital ex /dts es / dolby digital surround receiver, progressive scan universal disc player, system control, 3 chip dlp high definition projector, hd ready plasma monitor, reference control preamplifier/power amplifi (39 pages)
Av receivers / remotes/tuners / home system / multi-zone control amplifier / plasma display / dlp projectors / stereo receiver / power amplifiers / multi-channel super audio cd player / cd player / integrated amplifier / stereo tuner / high definition dig (36 pages)
High-performance hd2+ dlp video projector (7 pages)
Summary of Contents for Marantz VP-10S1
Page 1
Model VP-10S1 User Guide Projector Downloaded From projector-manual.com Marantz Manuals...
Page 2
- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Downloaded From projector-manual.com Marantz Manuals...
To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. Downloaded From projector-manual.com Marantz Manuals...
Lamp Replacement Instructions. Remember to handle the lamp with l'intérieur de l'unité lampe et du projecteur, et le mercure de care. In the event of serious trouble, call for Marantz authorized dealer. l'ampoule peut fuir par l'orifice de ventilation du projecteur.
11 13/16 inch (30 cm) or more from objects on all sides. • To hang the projector from a ceiling, contact the Marantz Authorized Dealer or Service Center. To ensure safe installation, the ceiling must be reinforced to support the projector’s weight.
It is almost impossible to have zero failure, even technology. This is not a problem only for Marantz, but all using the most advanced technology. This is not a problem projector manufactures. Therefore we have to note only for Marantz, but all projector manufactures.
Supports input of NTSC, PAL, SECAM and high-vision colors. Using an optimized system for movie viewing with satellite broadcasts (480i, 480p, 720p, 1035i, 1080i). the below image circuit and optical parts, the VP-10S1 • Rich array of input jacks including HDCP supported DVI-D...
• Control adapter cable (RCA miniature jack) x 1 VIDEO USER THROUGH CINEMA INFO LIGHT REMOTE CONTROLLER RC-12VPS3 • AA batteries x 2 • User Guide x 1 • Color temperature sensor x 1 • Warranty Card (1 copy each for USA, CANADA) Downloaded From projector-manual.com Marantz Manuals...
Press the cursor buttons ( [UP], [DOWN], [LEFT], [RIGHT]) to select menu items. u POWER ON indicator Lights up blue when power is on. When power is shut off, the lamp flashes for about 1 min before going out. Downloaded From projector-manual.com Marantz Manuals...
Connect the REMOTE CONTROL OUT Use to hang the projector from a ceiling. To hang the projector of the other Marantz product to the REMOTE CONTROL IN of from a ceiling, contact your nearest Marantz Authorized Dealer this projector and the REMOTE CONTROL IN of this other or Service Center.
Selects the device connected to the COMPONENT VIDEO IN 2 Every time the button is pressed, the selection rotates in the jack as the Input signal. order of Standard 1 ➔ Standard 2 ➔ Standard 3 ➔ Default. Downloaded From projector-manual.com Marantz Manuals...
– The Remote Controller operation may not function if the projector’s IR sensors are exposed to direct sun light or strong artificial light, or if there is an obstacle between the IR sensors and the Remote Controller. Downloaded From projector-manual.com Marantz Manuals...
• Specialized skill is required to hang this projector from a ceiling. For safety reasons, do not install the projector yourself. Contact your nearest Marantz Authorized Dealer or Service Center. Hanging the projector from the ceiling requires a separately solder hanger and pole.
Min. projection distance (inch) = Diagonal (inch) x 1.5688 Max. projection distance (inch) = Diagonal (inch) x 2.0918 • When using the LN10VP53 lens Min. projection distance (inch) = Diagonal (inch) x 2.0918 Max. projection distance (inch) = Diagonal (inch) x 3.1377 Downloaded From projector-manual.com Marantz Manuals...
Min. projection distance (m) = Diagonal (inch) x 3.985/100 Max. projection distance (m) = Diagonal (inch) x 5.313/100 • When using the LN10VP53 lens Min. projection distance (m) = Diagonal (inch) x 5.313/100 Max. projection distance (m) = Diagonal (inch) x 7.970/100 Downloaded From projector-manual.com Marantz Manuals...
Min. projection distance (inch) = Diagonal (inch) x 1.4400 Max. projection distance (inch) = Diagonal (inch) x 1.9200 • When using the LN10VP53 lens Min. projection distance (inch) = Diagonal (inch) x 1.9200 Max. projection distance (inch) = Diagonal (inch) x 2.8800 Downloaded From projector-manual.com Marantz Manuals...
Min. projection distance (m) = Diagonal (inch) x 3.658/100 Max. projection distance (m) = Diagonal (inch) x 4.877/100 • When using the LN10VP53 lens Min. projection distance (m) = Diagonal (inch) x 4.877/100 Max. projection distance (m) = Diagonal (inch) x 7.315/100 Downloaded From projector-manual.com Marantz Manuals...
EXT. OFF ON COMPONENT VIDEO OUT STANDBY FL OFF Component cable (commercially available) COMPONENT VIDEO OUT STANDBY FL OFF Component cable (commercially available) S-VIDEO OUT S-video cable (commercially available) VIDEO OUT Video cable (commercially available) Downloaded From projector-manual.com Marantz Manuals...
DVI-D cable (commercially available) Connecting to a Home Theater System You can control an entire home theater system using a PC and Marantz receiver equipment. To install the below system, contact your nearest Marantz Authorized Dealer or Service Center. VIDEO IN S-VIDEO IN COMPONENT VIDEO IN 1...
Tapping the buttons fine-adjusts the size. Holding the buttons down quickly changes the size. Press the PATTERN button again to cancel the focus pattern. This completes focusing and zooming. Downloaded From projector-manual.com Marantz Manuals...
Upward Downward Side view 1 / 2 Position the projected image horizontally on the screen using the buttons on the remote controller or projector. To right Top view To left Downloaded From projector-manual.com Marantz Manuals...
- Horizontal keystone correction - Note : Horizontal keystone is best corrected when the projector is installed on a flat surface and the image is shifted to the maximum height using the “Lens shift” feature in the menu. Downloaded From projector-manual.com Marantz Manuals...
• Immediately after shutting off the power, power cannot be reactivated from either the POWER button on the projector or the POWER ON button on the remote controller. Check the projector is on standby and then press the POWER button on the projector or the POWER ON button on the remote controller. Downloaded From projector-manual.com Marantz Manuals...
29) INPUT ASPECT INPUT1 MODE ASPECT COMP.1 THEATER FULL Select an aspect mode. COMP.2 NORMAL S-VIDEO DYNA. ZOOM VIDEO USER THROUGH CINEMA INFO To set the aspect mode for your screen, see the next page. Downloaded From projector-manual.com Marantz Manuals...
The image is enlarged to the maximum height and width of the screen, regardless of the aspect ratio of the 4:3 image. ❖ Through mode The image is displayed at the same resolution as an RGB/Video signal of 720 or less scanning lines. Downloaded From projector-manual.com Marantz Manuals...
The image is enlarged to the maximum height and width of the screen, regardless of the aspect ratio of the 4:3 image. ❖ Through mode The image is displayed at the same resolution as an RGB/Video signal of 720 or less scanning lines. Downloaded From projector-manual.com Marantz Manuals...
Dynamic/ User 540p pg. 34 576p Index 1 / 2 / 3 / Default 720p 1035i 1080i DVI System The menu item does not appear or adjustment is not possible with some input signals and settings. Downloaded From projector-manual.com Marantz Manuals...
1, 2, 3, Default User 1, 2, 3 As suggested by the above table, adjust picture quality to your liking and save the adjustments in indexes 1, 2 and 3. See “Preset” ( pg. 34) Downloaded From projector-manual.com Marantz Manuals...
An adjustment bar appears on the screen. Use the buttons to adjust the item. Press the button to enter the setting and return to menu item selection. MENU V-MUTE PATTERN INPUT ENTER ENTER 1, 2 1, 2 INPUT ASPECT Downloaded From projector-manual.com Marantz Manuals...
: Sets the contour enhancement gain of the color signal in the vertical direction. Enhancement (Enhancer Gain) : Sets the overall enhancement of the color signal. Delay : Sets the time delay of the chrominance signal with respect to the luminance signal. Downloaded From projector-manual.com Marantz Manuals...
Page 32
Enables cross color suppression. Off : Disables cross color suppression. Use this mode for sources that do contain cross colors, such as progressive scanning DVD players. Sharpness Filter : Sets the sharpness of DVI and RGB images. Downloaded From projector-manual.com Marantz Manuals...
The setting item will appear on the screen. Use the buttons to set the item. Press the button to enter the setting and return to menu item selection. MENU V-MUTE PATTERN INPUT ENTER ENTER 1, 3 INPUT ASPECT Downloaded From projector-manual.com Marantz Manuals...
The setting item will appear on the screen. Use the buttons to set the item. Press the button to enter the setting and return to menu item selection. MENU V-MUTE PATTERN INPUT ENTER ENTER 1, 3 INPUT ASPECT Downloaded From projector-manual.com Marantz Manuals...
The setting item will appear on the screen. Use the buttons to set the item. Press the button to enter the setting and return to menu item selection. MENU V-MUTE PATTERN INPUT ENTER ENTER 1, 2 1, 2 INPUT ASPECT Downloaded From projector-manual.com Marantz Manuals...
If you replace the lamp before the 1,500 hour lamp life, be sure to reset the lamp life counter. To do this, select “Reset Lamp Life” from the Config menu. When you do so, the below message appears on the screen. Reset Lamp Life Select “Yes” and press the ENTER button. This will reset the lamp life counter. Downloaded From projector-manual.com Marantz Manuals...
The setting item will appear on the screen. Use the buttons to set the item. Press the button to enter the setting and return to menu item selection. MENU V-MUTE PATTERN INPUT ENTER ENTER 1, 3 INPUT ASPECT Downloaded From projector-manual.com Marantz Manuals...
The setting item will appear on the screen. Use the buttons to set the item. Press the button to enter the setting and return to menu item selection. MENU V-MUTE PATTERN INPUT ENTER ENTER 1, 3 INPUT ASPECT Downloaded From projector-manual.com Marantz Manuals...
– Approximately 2 minutes after the lamp reaches the end of its life, power to the projector shuts off and the WARNING indicator lights up red. If the below message appeared on the screen before power shut off, promptly replace the lamp with a new one. (See “Lamp Unit Replacement” pg. 36.) Warning LampLife 0 Hours Downloaded From projector-manual.com Marantz Manuals...
• The lamp may break under excessive force or mechanical pg. 36.) shock. After replacing the lamp, press either the POWER button • Use only the Marantz original lamp unit LU10VPS1 (sold on the projector or the POWER ON button on the remote separately). controller.
Page 41
Install a new lamp unit securely in the correct orientation. Lock the lamp unit in place with the 2 screws. (Slotted head screwdriver required.) Fold the handle over as it was before. New lamp unit Downloaded From projector-manual.com Marantz Manuals...
Adjustment takes about 4 to 5 min. When the color temperature sensor is detached from the lens, the below message appears on the screen. Complete Receptacle Press "ENTER" to exit Downloaded From projector-manual.com Marantz Manuals...
Replacement Parts If replacement parts are needed, contact your nearest Also, adjustment processing can be interrupted by pressing Marantz dealer or authorized service center. Use only the MENU button. replacement parts specified by Marantz. Unauthorized substitutes may result in fire, electric shock or other Reposition the picture on the screen (up, down, left and hazards, and will forfeit warranted servicing.
AC IN 3-prong grounding type Trig. 1 Out/Trig. 2 Out Miniature jack x 2 Output voltage: 12V DC or 0V RS232C RS232C receptacle plug x 1 Specifications and appearance are subject to change without notice. Downloaded From projector-manual.com Marantz Manuals...
EXPAND: 0 (Black) to 246 (White). Color temperature Hue of white light. An image of low color temperature has a warm feeling (more yellow and red). An image of high color temperature has a cold feeling (more blue). Downloaded From projector-manual.com Marantz Manuals...
Note: • If the lamp still does not function after the replacement and initialization of the lamp life, contact a Marantz authorized dealer, or service center. Note: This projector uses a microcomputer. External noise can cause malfunctions. In such case, shut power OFF and unplug the power cable from AC power outlet.
The lamp has reached the end of its life. Replace the lamp and reset lamp life. Improper signal feed to the projector. Adjust resolution, V(Hz) : refresh rate of the OUT OF RANGE equipment, referring to the Timing Chart. Downloaded From projector-manual.com Marantz Manuals...
DIMENSIONS ❖ ❖ ❖ Rear Front ❖ Bottom Unit : inch (mm) Downloaded From projector-manual.com Marantz Manuals...
Page 49
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands is a registered trademark. Printed in Japan 01/2004 ECMf 09AV851250 Downloaded From projector-manual.com Marantz Manuals...