Selecting An Input Signal; Selecting Aspect Mode - Marantz VP-10S1 User Manual

Selecting an Input signal

You can select the Input signal from amongst the devices connected to the projector.
Every time the INPUT button on the projector or the remote controller is pressed, the Input signal rotates in the order of
COMPONENT 1 ➔ COMPONENT 2 ➔ S-VIDEO ➔ VIDEO ➔ RGB ➔ AUX. The Input signal can also be switched to a specific
source by pressing the COMP.1, COMP.2, S-VIDEO, VIDEO, RGB or AUX button.

Selecting Aspect Mode

You can set the aspect ratio of the projected image to any of four modes, using the remote controller.
Every time the ASPECT button on the remote controller is pressed, the aspect mode rotates in the order of Full ➔ Normal ➔ Zoom
➔ Through. The aspect ratio can also be switched to a specific mode by pressing the FULL, NORMAL, ZOOM or THROUGH
button. And the aspect mode can also be selected from the menu. (
INPUT ASPECT
INPUT1 MODE ASPECT
COMP.1 THEATER
COMP.2 STD
S-VIDEO DYNA.
VIDEO USER THROUGH
RGB CINEMA
To set the aspect mode for your screen, see the next page.
FULL
Select an aspect mode.
NORMAL
ZOOM
INFO
INPUT ASPECT
INPUT1 MODE ASPECT
COMP.1 THEATER FULL
Select an Input signal.
COMP.2 STD NORMAL
S-VIDEO DYNA. ZOOM
VIDEO USER THROUGH
RGB CINEMA INFO
AUX
pg. 29)
21