How To Operate Menus - Marantz VP-10S1 User Manual

How to Operate Menus

This projector uses menus to make setting and adjustment easy.
1.
Press the MENU button. The MENU screen will appear on the screen.
3 4
2.
Use the and buttons to select a main menu (Picture Adjust, Setting, System, Display, Config, Trigger 2, Preset) and
2
press the button.
3 4
3.
Use the and buttons to select a menu item and press the
3 4 1 2
4.
Use the , , and
•
The current setting or adjustment level of all items is displayed along the right side of each the menu item.
5. Press the MENU button again to close the menu. The MENU screen will go out.
❖
Picture Mode and Memory
This projector offers 4 pictures modes: Theater, Standard, Dynamic and User. Select them by pressing the THEATER, STD,
DYNA. and USER buttons on the remote controller. Moreover, each of these picture modes has 3 indexes for saving picture
quality adjustments.
Picture mode
Theater
Standard
Dynamic
User
As suggested by the above table, adjust picture quality to your liking and save the adjustments in indexes 1, 2 and 3.
See "Preset" ( pg. 34)
Menu
Picture Adjust
Setting
System
Display
Config
Trigger 2
Preset
Main menu
buttons to make the setting or adjustment of the selected item.
1, 5
2, 3, 4
Index
1, 2, 3, Default
1, 2, 3, Default
1, 2, 3, Default
1, 2, 3
Standard 1
Contrast 50
Brightness 44
Color 58
Sharpness 7
0
Tint
Noise Reduction 0
3
Color Temp.
Fine Menu
Setting or adjustment level
Menu item
2
button.
MENU
ENTER
INPUT
PATT.
1, 5
V-MUTE
2, 3, 4
ASPECT
25