Download Print this page

Marantz VP-10S1 User Manual

Vp-10s1 dlp projector mount

Hide thumbs Also See for VP-10S1:

Download this manual See also: Reference Manual, User Manual

Model MOUNT10 User Guide

VP-10S1 DLP Projector Mount

Page 1 Model MOUNT10 User Guide VP-10S1 DLP Projector Mount...
Page 2: Installation Instructions
Insert Base Plate connectors # 1 into the lateral positioning slots 3 as shown in # 4 from the underside of Plate 1. The lateral positioning slots will give you 4 1/2" inches of lateral adjustment for projector alignment. Step 2 Horizontal Adjustment Plate 2 (Base Plate Connector Holes # 3).
Page 3 12 1/4" Plate 4 Invert the projector and place it on a soft and flat surface. Align the six (6) rubber spacers provided with the six (6) 6 (mm) mounting holes on the projector and secure with the six (6) 6 (mm) screws provided.
Page 4 Mount Side Plate 4 Work in a group of 4 or more to carry the projector and follow manufacturer's guidelines for relocating as stated in the VP-10S1 owner's manual. Lift and slide the projector onto the 6 (mm) screws previously installed in the metal studs of the plate on the ceiling (see arrow in Figure 7).

Mount10