Positioning The Projected Image - Marantz VP-10S1 User Manual

Positioning the Projected Image

You can position the projected image on the screen using the "Lens shift" feature in the menu (OSD).
(For an explanation of this feature, see "Configuration"
First, project an image on the screen. (If you haven't an Input signal, display the focus pattern.)
1.
Press the MENU button on the remote controller or projector to display the menu.
2.
Select "Config" using the
3.
Select "Lens shift" using the
(If you haven't an Input signal at this point, display the focus pattern.)
4.
Position the projected image vertically on the screen using the
Upward
Downward
5. Position the projected image horizontally on the screen using the
To right
To left
18
1
2, 3, 4, 5
3 / 4
buttons, then press the
3 / 4
buttons, then press the
pg. 32.)
MENU
INPUT
2
button.
2
button.
3 / 4
buttons on the remote controller or projector.
Side view
1 / 2
buttons on the remote controller or projector.
PATT.
1
V-MUTE
2, 3,
4, 5
ENTER
ASPECT
Top view