Picture Adjust - Marantz VP-10S1 User Manual

Picture Adjust

You can adjust picture quality to your liking in each of the picture modes and save those adjustments in memory.
This projector makes 3 memory indexes (1, 2 and 3) available for each picture mode.
❖
For a video signal input, the following adjustments can be made.
Menu
Picture Adjust
Setting
System
Display
Config
Trigger 2
Preset
Note:
• Some menu items cannot be adjusted depending on the input signal.
• If default is selected as the index, picture quality cannot be adjusted. To adjust picture quality, select an index from 1 to 3.
See "Preset" (
❖
Contrast
Contrrast 50
❖
Color Temp. (Color Temperature)
1 : Red comes out strong. Color temperature is about 5250 K.
2 : Red is mildly strong. Color temperature is about 5800 K.
3 : Normal. Color temperature is about 6500 K.
4 : Blue is mildly strong. Color temperature is about 7500 K.
5 : Blue comes out strong. Color temperature is about 9300 K.
Color Temp. 2
❖
Adjusting Picture Quality
1. Select the desired menu item and press the
1 2
2.
Use the and
3
3. Press the button to enter the setting and return to menu item selection.
ENTER
26
Downloaded From projector-manual.com Marantz Manuals
Standard 1
Contrast 50
Brightness 44
Color 58
Sharpness 7
0
Tint
Noise Reduction 0
3
Color Temp.
Fine Menu
pg. 34)
2
buttons to adjust the item.
3.
PATTERN INPUT
1, 2
Menu item
Contrast
Brightness
Color
Sharpness
Tint
Noise Reduction
Color Temp. (Color Temperature)
button. An adjustment bar appears on the screen.
MENU V-MUTE
ENTER
INPUT ASPECT
Adjustment range
0
Weak
0
Dark
0
Light
0
Soft
R50
Purple
0
Weak
1 2
Red
3.
1, 2
100
Strong
100
Bright
100
Deep
31
Sharp
G50
Green
63
Strong
3 4 5
Blue