Table of Contents
Advertisement
LEGEND
7.10.2 System with: direct pellet stove and room probe or external thermostat** (optional) with external DHW
production controlled by external thermostat (optional)
All activities relating to electrical connections in the electronic board must be carried out by
authorised personnel.
** If the external thermostat is used, activate the "EXT THERMOSTAT" function on the control panel and con-
nect it directly to the electronic board (see electrical system below).
Adjustable setting
SETTING
ROOM TEMP.
WATER TEMP.
DHW TEMP
SEASON
AUTO ECO
Parameters to set
Hydraulic diagram
23
RIVER IDROTECH 18 - 24 - 24H2O
Fig. 40
1
Anti-condensation valve
2
External thermostat
3
Room probe
4
Electronic board
5
Stove
6
Zone valve
7
DHW
8
Expansion vessel
Wiring diagram for connecting external thermostat and zone valve (in the case of several val-
A
ves, connect in parallel)
B
Wiring diagram for connecting the external thermostat
VALUES
5°C - 35°C
30°C - 80°C
75°C
WINTER (summer may be activated)
OFF (with winter setting)
ON (with summer setting, cannot be deactivated)
SETTING
CONFIGURATION
VALUES
2
Advertisement
Table of Contents
