Configuration With Storage Tank And Auxiliary Wall-Mounted Boiler (Example) - Cadel RIVER IDROTECH 18 Installer Manual

LEGEND
Disconnect any three-way valve and stove internal flow switch, if equipped with a DHW kit.

7.14 CONFIGURATION WITH STORAGE TANK AND AUXILIARY WALL-MOUNTED BOILER (EXAMPLE)

7.14.1 System with: pellet stove connected to a storage tank with auxiliary wall-mounted boiler
All activities relating to electrical connections in the electronic board must be carried out by
authorised personnel.
Parameters to set
28
RIVER IDROTECH 18 - 24 - 24H2O
Fig. 44 - Configuration 5
Fig. 44
1
Stove
2
Cold H2O manifold
3
Hot H2O manifold
4 3-way valve
5 Electronic board
6 Zone valve
7 Radiator
8 Storage tank
9 NTC probe
10
Release pump
11
Room thermostat
12
Expansion vessel
A
Room thermostat independent from the stove (to be connected to the zone valves, if necessary)
B NTC probe to be connected directly to the electronic board (see electrical system)
SETTING
CONFIGURATION
AUXILIARY BOILER
VALUES
1 - 2 - 3 - 4 - 5
ON