Cadel RIVER IDROTECH 18 Installer Manual page 4

Fig. 2 - Remove the fastening brackets
Position the stove and connect it to the smoke duct. Adjust the 4 feet (J) to find the right level so that the smoke duct and pipe are
coaxial. If the stove needs to be connected to an exhaust pipe that goes through the back wall (to go into the flue), be extremely
careful not to force it.
Forcing the stove smoke exhaust or using it improperly to lift or position the stove will irreversibly compromise
its function.
Turning the feet clockwise lowers the stove. Turning the feet anticlockwise raises the stove (see below).
4
RIVER IDROTECH 18 - 24 - 24H2O
Fig. 1 - Remove the fastening brackets
Fig. 4 - Foot adjustment
Fig. 3 - Remove the fastening brackets