USE
1. Description
A
B
mode
C
2. Consultation or modification of temperatures
IMPORTANT: The radiator must be in automatic mode (AUTO, PROG ...), with its Comfort temperature set to the
maximum.
1
mode
❶ Press any button to activate the screen. The current mode is displayed:
ON = ready for operation,
To change the mode, press mode.
❷ From the ON mode, press + or - to display the temperature and change it.
❸ Press mode or wait for 5 seconds to exit.
When switching over from the
On the receiver:
Green LED illuminated = power supply OK
Red LED illuminated = heating request pending
3. Open window detection
You have paired a window sensor to your setup.
In the case of an open window, the adjacent screen (----) indicates that the system is in Frost
Protection mode (7°C, cannot be adjusted), unless it is shut down.
Temperature display
A
Select the mode
B
Adjustment buttons
C
2
mode
= Stop.
mode to the ON mode, the setting's default value is restored: 20°C.
3
mode
7