Table of Contents
Advertisement
4. Configuring your device (Menu 1)
2
>5s
1
❶ Turn the dial to
, then press the
i
button for 5 seconds (❷).
Menu 1-02 Programme duration
You can set programming by the hour, half hour, or quarter of an hour.
Default setting: 1 hour.
Menu 1-03 Pre-heat activation/deactivation
Pre-heat means you can enjoy the Comfort temperature you want at the scheduled hour (see § "Pre-heat
function").
Default setting: Pre-heat off
Menu 1-04 Selecting the way the receiver relay opens
Tybox allows you to choose which way the relay opens to suit all use cases.
Default setting: Relay normally open
The relay is normally open
The relay is normally closed
Menu 1-08 Controlling the Comfort temperature
For hot water heaters with thermostatic valves, the Comfort temperature can be provided by adjusting the
thermostat on each radiator.
In AUTO mode, the device will show "Conf" during Comfort periods and will be set to constant heating. Only the
Economy and Frost Protection temperatures are controlled by the Tybox.
Default setting: Comfort temperature is controlled by the Tybox.
Comfort temperature controlled by Tybox
Comfort temperature controlled by each radiator
3
❸ Press the 1 button.
To change the various settings,
press the + or - buttons (❹), then
press OK to confirm the change and
go to the next setting (❺).
60 min.
30 min.
15 min.
Pre-heat off
Pre-heat on
2
4
0
5
Menu 1-02 does not appear if your Tybox is
linked with the Tydom app (menu 1-10 = 1).
Menu 1-03 does not appear; -
if your Tybox is linked with the Tydom app
(menu 1-10 = 1).
- if the Comfort temperature is controlled by
each radiator (menu 1-08 = 1).
Menu 1-08 does not appear: -
if your Tybox is linked with the Tydom app
(menu 1-10 = 1).
- if pre-heat is on (1-03 = 1).
Choice 1 turns off pre-heat (1-03 = 0). In this
case, menu 1-03 no longer comes up.
1
0
6
EXIT
❻ To exit the mode, turn the dial.
5
Hide quick links:
Advertisement
Table of Contents
