Table Of Contents; Safety Instructions - Fichtelbahn ReadyServoTurn Manual

R
eady
Line
FichtelBahn
Inhaltsverzeichnis
01. Safety Instructions ............................................................................................3
02. Introduction ...................................................................................................... 4
03. Technical Data...................................................................................................4
04. Connecting the ReadyServoTurn ......................................................................5
05. Configuration of the module ..........................................................................11
06. Module settings for the ReadyServoTurn .......................................................29
07. LED indication .................................................................................................31
09. Firmware update ............................................................................................33
10. Support case and further help ........................................................................34
11. Warranty Information .....................................................................................35

01. Safety Instructions

To reduce the risk of electric shock and injuries do not touch parts that carry voltage.
Do not touch conductive material that might carry voltage in case of a fault, e.g. short
circuit, improper input voltage, excessive humidity and accumulation of condensate.
To reduce these risks, keep these safety precautions in mind:
Use this module only indoors and in a clean and dry environment. Avoid moisture and
splash water in close proximity.
Switch off the voltage supply before carrying out wiring work. Only use wire with suf-
ficient cross-section. Wait for 2 hours after accumulation of condensate.
Manual ReadyServoTurn Page 3
© 2022 FichtelBahn®
Manual Version 1.0
Technical changes and errors reserved