Table of Contents
Advertisement
FichtelBahn
05.5 Extended start conditions of macros
Please notice:
It is advisable to not to use macros 0 to 3 for normal se-
quences. The normal program sequence should start with
macro 4. If an input is required, a start instruction with
"Start macro X" can be add to macro 0 to 3.
Manual ReadyServoTurn
Manual Version 1.0
In addition to the known start conditions
Execution from host, time and start behaviour
at module start, a macro can be started from
the 4 inputs of the module.
To achieve this, the function "Start macros
from external input port" must be activated by
right-clicking on the module name.
Now the 4 inputs are permanently linked with
the 4 first macros. If input 0 changes state from
0 to 1, macro 0 is started.
The assignment is visible in the following table.
If the function is activated, all 4 dependancies
are created. If not all inputs are required for
this function, the macros affected must be left
without a function.
Input
Input 0
Input 1
Input 2
Input 3
Page 28
R
eady
Line
Assigned macro
macro
00
macro
01
macro
02
macro
03
© 2022 FichtelBahn®
Technical changes and errors reserved
Advertisement
Table of Contents
