Fichtelbahn ReadyServoTurn Manual page 12

FichtelBahn
By clicking on the button with the plug symbol (4.) the connection will be initiated and
all connected nodes will be loaded and shown in the node tree view (5.).
By double clicking on a node in the node tree view (5.) this node will be loaded and its
functions und options will be shown in the node detail window (6.).
For the "ReadyServoTurn" module, there are two ways of achieving an operational
state:
1. Easy to use - Node configurator for beginners
... easy and fast with with a simple and intuitive user interface "BiDiB Node Configurator".
standard use cases are set up automatically.
Window Descripton
Actions Update firmware
With this button the firmware can be updated (see Firmware Update on page 33)
BiDiB Node Configurator
Actions
Application examples can be loaded via this button. (see pageSeite 33 13)
2. Individual macro configuration - for experienced users
....configure the application according to your own wishes individually with the help of the macros.
Window Descripton
Update firmware
Actions
With this button the firmware can be updated (see Firmware Update on page 33)
Info Technical information about the module
Accessories Assigning and testing the individual switching outputs or servo outputs, check the feedback indication.
Macros Memory locations for each individual action, using the macro step chain
Switch ports 4 relay outputs for switching their states ON / OFF
Servo ports 4 servo outputs and their control characteristics, position up / down, speed
Flags Visualisation of internal flags for macro programmings
CV Definitions Reading and writing of module specific CV settings (see Module settings on page 29)
Manual ReadyServoTurn
Manual Version 1.0
Page 12
R
eady
Line
© 2022 FichtelBahn®
Technical changes and errors reserved