Module Settings For The Readyservoturn - Fichtelbahn ReadyServoTurn Manual

FichtelBahn

06. Module settings for the ReadyServoTurn

All settings that can be adjusted for the ReadyServoTurn can be accessed via the
configuration tool "BiDiB-Wizard 2". It is not possible to change the settings at the unit
itself.
06.1 ReadyServoTurn features
Right-clicking on the ReadyServoTurn in the node list opens a window with further
options. The "Features" window can be opened here.
Please notice:
Only make changes to these settings
after consulting FichtelBahn technical
support.
06.2 CV register of the ReadyServoTurn
With a click on the „CV Definitions" tab (1), the CV registers become visible in the
BiDiB Wizard. The current value can be read individually (right click on the individual
CV, then read CVs) or all CVs of the module (2). Writing back new values is done with
the same procedure (write CVs).
Please notice:
Changes to these
settings are not neces-
sary!
Manual ReadyServoTurn
Manual Version 1.0
Page 29
R
eady
Line
© 2022 FichtelBahn®
Technical changes and errors reserved