Fichtelbahn ReadyServoTurn Manual page 25

FichtelBahn
Example at Function
Macro transferred but not stored
00
01 Unsaved changes
Permanently stored
02
03 Macro not yet loaded
05.3.5 Accessories
The "Accessories" window is the top level and acts as a link between the host program
and the macro. Example:
Servo turnout with two aspects:
Function
A
Accessory
B
Initial state
C
Execution state
D
Accessory aspects
Please notice:
Macro steps can be added and deleted with a right click
Manual ReadyServoTurn
Manual Version 1.0
Description
Macro can be tested, but is not stored
Macro not transferred or stored
Macro stored on module
Macro not yet loaded from module
Description
Accessory 00 to accessory XX are storage locations for sets of one or more aspects. In the current
example, accessory 00 is the listing of the aspects for a turnout with two possible positions (straigth/
diverging).
An alternative example: a light signal with 7 states requires an accessory with 7 aspects.
In the drop down menu "initial state" you can define the start-up behaviour for the accessory when
the module is switched on.
Unchanged
Restore
Aspect X
If the associated macro is completed successfully, an "Accessory finished" message is automatically
sent to the host. If an error occurs, an error is transmitted. The transmission is sent only once per
execution and is signalled in the BiDiB Wizard with a symbol.
Aspects can be added to the accessory here, each of which are assigned a macro.
Aspect 0: Movement 100% to 0%
Aspect 1: Movement 0% to 100%
No aspect is executed when the module is switched on
The module repeats the last sent aspect when it is switched on with this setting
enabled.
The defined aspect X is executed when the module is switched on.
Page 25
R
eady
Line
© 2022 FichtelBahn®
Technical changes and errors reserved