Fichtelbahn ReadyServoTurn Manual page 18

FichtelBahn
05.2.6 Servo and relay separated (effects)
In this set-up, the module can move 1-4 servos and, separately, the relays 1-4. The
servos and the relays are divided between separate accessories 0-7.
The BiDiB Node Configurator creates the macros and accessories according to this illustration.
The servos or relay outputs must be connected the same way.
TERM
TAST
ID DCC BiDiB
ReadyServoTurn
4-fach BiDiB-Servodecoder
with 4x Relais and 4x Input
Servo 0
- +
D
1 1 3 3
Data GND Data GND
INPUT REL 0
0 0 2 2
NO NC
Data GND Data GND
SERV 0
IN1 IN3
IN0 IN2
REL 0
Servo 0 bis Servo 3
Belegung Servo-Port
GND 5V Data
Node configurator
Effect / Parts • servo only
Effect / Parts • Servo and relay separated
Manual ReadyServoTurn
Manual Version 1.0
Power
12V - 18V
+ -
DC
R
eady
Line
FichtelBahn
Made in Germany
Servo 1 Servo 2 Servo 3
- + - + - +
D D D
REL 1 REL 2 REL 3
NO NC NO NC NO NC
SERV 1 SERV 2 SERV 3
REL 1 REL 2 REL 3
Konfigura�on und Anschlusskonzept
Servo 0-3:
Accessory 0
Begriff 0 Servo 0 = 0%
Begriff 1 Servo 0 = 100%
Accessory 2
Begriff 0 Servo 2 = 0%
Begriff 1 Servo 2 = 100%
Relais 0-3:
Accessory 4
Begriff 0
Relais 0 = OFF
Begriff 1 Relais 0 = ON
Accessory 6
Begriff 0
Relais 2 = OFF
Begriff 1 Relais 2 = ON
Application examples
Effect applications e.g. shed gates, waving pedestrians
Effect applications for servo movements and separate relay for switching
of loads
Page 18
R
eady
Line
Accessory 1
Begriff 0 Servo 1 = 0%
Begriff 1 Servo 1 = 100%
Accessory 3
Begriff 0 Servo 3 = 0%
Begriff 1 Servo 3 = 100%
Accessory 5
Begriff 0
Relais 1 = OFF
Begriff 1 Relais 1 = ON
Accessory 7
Begriff 0
Relais 3 = OFF
Begriff 1 Relais 3 = ON
© 2022 FichtelBahn®
Technical changes and errors reserved