Installation; Transport And Storage Conditions - ATH-Heinl RG 5.5 WG User Manual

2

INSTALLATION

The machine must be installed by authorized personnel in accordance with the instructions.
The operating instructions (including the protocol) are an important part of the machine or
product.
Please keep it in a safe place!
The product must be inspected by a suitable and authorized company or institution after completion of the
installation, handover, if necessary instruction and afterwards regularly according to the regulations and
legal provisions valid in the country of operation.
2.1

Transport and storage conditions

For transport and positioning of the machine always use suitable slinging, lifting or floor conveying
equipment and pay attention to the center of gravity of the machine.
The machine should only be transported with the original packaging.
Data
Weight
Width
Length
Height
Storage temperature
Transport and storage instructions
Lift carefully, support the load properly with suitable aids in perfect condition.
Avoid unexpected elevations and jerks. Be careful of unevenness, cross gutters, etc.
Keep the removed packaging parts in a collection place inaccessible to children until
disposal.
Transport, loading and unloading
When loading, unloading or transporting the unit to the place of use, a forklift with a load capacity of min.
1000 kg must be used. The forks of the forklift must be inserted into the fork holders provided for this
purpose.
® Copyright ATH-Heinl GmbH & CO.KG, All rights reserved / Misprints and technical changes reserved
12
Release date: 10-2022 / Product manufacturer ATH-Heinl GmbH & CO. KG
510 kg
1100 mm
1225 mm
2580 mm
0 to +40°C