Error Messages - ProLights Astra Profile400 User Manual

Table of Contents

Advertisement

17 - ERROR MESSAGES

The error is shown on the unit display. In the table below, the "ERROR SHOWED ON SCREEN" column
lists the possible errors, accompanied by a possible cause ("POSSIBLE" CAUSES "column).
The color of the error messages (listed in the "COLOR MESSAGES" column) is different for each board
it refers to ("PCB" column).
On page 39 you can see the location of the various pcb boards.
ERROR SHOWED ON
SCREEN
[PAN MOTOR ERROR]
[PAN LOCKED]
[TILT MOTOR ERROR]
[TILT LOCKED]
[PAN ENCODER ERROR]
[TILT ENCODER ERROR]
[PAN ERROR]
[TILT ERROR]
[DISPLAY BATTERY
ERROR]
[LED ERROR]
[LED TEMPERATURE
ERROR]
[LED TEMP. SENSOR
ERROR]
36
POSSIBLE CAUSES
This message will appear after the reset of the product if:
the PAN magnetic-indexing circuit detect a failure (sensor
failed or magnet is missing).
or the stepping motor is defective.
or its driving IC on the PCB is defective.
or the product is not located in the default position after the
reset of the fixture.
Pan is locked.
This message will appear after the reset of the product if:
the TILT magnetic-indexing circuit detect a failure (sensor
failed or magnet is missing) .
or the stepping motor is defective.
or its driving IC on the PCB is defective.
or the product is not located in the default position after the
reset of the fixture.
Tilt is locked.
Pan encoder not detecteld.
Tilt encoder not detecteld.
Pan sensor not detecteld.
Tilt sensor not detecteld.
Recharge The battery on the display board, keeping the
product ON for some hours.
If the error still occurrs, the battery is faulty . Replace the
battery on the display board.
This error message is displayed when the lamp is switched
OFF without a command from the product control system.
This error message indicates that an overheating on the
lamp has occurred and the lamp has been switched OFF by
the product protection system.
LAMP sensor damaged (open or in short circuit).
PROLIGHTS - Astra Profile400
POSSIBLE PCB
WITH ANOMALY
2U
2U
2U
2U
2U
2U
2U
2U
2U
2U
2U
2U
2U
2U
2U
2U
1U
1U
3U
3U
3U

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ml689

Table of Contents