Thermo Scientific Vanquish Installation Manual page 9

Solvent Monitor
Installation Guide
If personnel other than a Thermo Fisher Scientific service engineer
installs the device, follow the steps below.
1. Loosen the screw of the mounting bracket on the rear side of the
solvent monitor.
2. Hook the mounting bracket of the solvent monitor onto the right
side of solvent rack railing.
Figure 2: Hooking the solvent monitor onto the right side of the solvent
rack railing (view from the right side)
3. Fix the mounting bracket to the railing by fastening the screw.
Figure 3: Fastening the screw
3 • Installation
Page 9