Thermo Scientific Vanquish Installation Manual page 15

Tool required
Follow these steps
Solvent Monitor
Installation Guide
• Parts not included in the ship kit:
The table shows the necessary parts and the requirements.
Needed part Capacities
Solvent • 0.25 L
reservoirs
• 0.5 L
• 1 L
• 2 L
• 2.5 L
• 5 L
Capillary cutter delivered with the solvent monitor
1. Connect the solvent lines to the pump (refer to the Operating
Manual of the pump).
2. Take a solvent monitor line.
Maximum Remarks
height
34 cm Do not use air-tight caps, for
example, caps with air valves.
Recommended: Fisherbrand™
solvent reservoirs (for ordering
information, contact your local
Thermo Fisher Scientific sales
organization)
3 • Installation
Page 15