Thermo Scientific Vanquish Installation Manual page 25

Channel Status Indicators
Solvent Monitor Status Indicator
Solvent Monitor
Installation Guide
The table describes the various statuses a channel status indicator can
assume.
Color Description
Off Channel deactivated
Green Channel is activated and the solvent monitor waits until an initial
(flashing) measurement is performed (takes about 30-60 seconds per
channel).
Green Channel is activated and there is sufficient solvent/waste capacity
Yellow Warning level reached
Solvent reservoirs: The level in the solvent reservoir has fallen
below the warning level
Waste containers: The level in the waste container has risen above
the warning level
For information on the possible causes and remedial actions, see
Operating Issues
Red Error level reached
Solvent reservoirs: The level in the solvent reservoir has fallen
below the error level
Waste containers: The level in the waste container has risen above
the error level
For information on the possible causes and remedial actions, see
Operating Issues
The status of the solvent reservoirs and waste containers is also
indicated on the ePanel and on the Vanquish Display. Messages in the
Audit Trail give more background information on the status.
The table describes the various statuses the solvent monitor status
indicator can assume.
Color Description
Off Solvent monitor is turned off.
Green Solvent monitor is turned on and is functional.
Red Solvent monitor is turned on, but the firmware is not running.
Messages in the Audit Trail give more background information on the
status.
(} page 35).
(} page 35).
4 • Operation
Page 25