Trailer Jack - Wallenstein WP525 Operator's Manual

Transport

7.4 Trailer Jack

The trailer jack supports the machine when it is not attached to
a tow vehicle.
WARNING!
Do not pull the pin out of the bracket when there
is weight on the trailer jack. The machine could
move unexpectedly and cause a minor to severe
injury. Attach the machine to a tow vehicle or
place blocks under the trailer tongue to hold the
weight before you remove the pin.
7.4.1 Lower the Trailer Jack
1. Pull the pin out of the bracket.
2. Rotate the jack to the vertical position.
3. Insert the pin through the bracket to secure the jack in the
vertical position.
4. Turn the handle clockwise to lower the jack leg.
Figure 47 – Trailer jack in the lowered position
7.4.2 Stow the Trailer Jack
1. Support the machine to remove weight from the jack.
2. Turn the handle counterclockwise to raise the jack leg.
3. Pull the pin out of the bracket.
4. Rotate the jack to the horizontal position.
5. Insert the pin through the bracket to secure the jack in the
horizontal position.
Figure 48 – Trailer jack in the stowed position
01782
01782
52
WP525
Firewood Processor