Xantrex XPower 400 Owner's Manual page 63

Table 5-1 Troubleshooting reference
Problem
Green
Charging
Status light is
still flashing
and hasn't
changed to
steady after 50
hours of
charging.
The
compressor
runs but won't
inflate
(XPower
Powerpack
400 Plus
The
compressor
runs slowly
(XPower
Powerpack
400 Plus
975-0057-01-01
Get user manuals: See SafeManuals.com
Possible Cause
The voltage at the AC
wall outlet is less than
120 V AC.
Internal battery is
permanently damaged.
The valve connector
may not be securely
placed on the valve
stem.
The item being
only). inflated may have a
leak.
The compressor may
have overheated from
excessive use.
Battery voltage is too
only). low.
Troubleshooting Reference
Solution
Use AC wall outlet that supplies 120
V AC.
Replace the battery.
Check that the valve connector is
securely placed on the valve stem
before closing the thumb latch.
Check that the item being inflated
has no leaks.
Check the compressor hose for any
breaks or leaks at connections.
Turn off the compressor and let it
cool down.
Check the condition of the internal
battery. The battery may need to be
recharged or replaced.
5-5