Xantrex XPower 400 Owner's Manual page 37

975-0057-01-01
Get user manuals: See SafeManuals.com
Closely follow these instructions for jump-
Important:
starting your vehicle as they may be different from the
instructions supplied with other jump-start products or
jump-start cables.
To jump-start a vehicle or boat engine:
1. Turn off the vehicle or boat ignition and all accessories.
2. Engage the park or emergency brake and place the
transmission in park for an automatic or neutral for a
manual.
3. If jump-starting a boat engine, purge the engine
compartment and bilge of all fumes before jump-starting.
4. Connect the cables to the Jump-Start Cable Port on the
left side of the XPower
5. Position the XPower Powerpack
near the battery and away from all moving parts of the
engine.
6. Connect the red positive (+) clip of the cables to the
positive (+) terminal of the engine battery.
The battery's positive terminal is usually larger in
diameter than the negative terminal. In most vehicles, the
battery's positive terminal has a red wire connected to it.
7. Connect the black negative (–) clip of the cables to the
engine block, cylinder head, or other stationary heavy
metal part of the motor, or to the negative (–) battery
terminal.
Before starting the engine, make sure the
Powerpack and the cables are clear of belts and fans. Do
not crank the engine for more than 4 seconds.
Jump-Starting a Vehicle's Engine
Powerpack.
on a flat, stable surface
XPower
3-11