Xantrex XPower 400 Owner's Manual page 42

Operation
3-16
Get user manuals: See SafeManuals.com
CAUTION
The XPower Powerpack
large capacity inflatables such as float tubes, large
air mattresses, and inflatable boats. These types of
products require extended inflating times which
may damage the compressor.
To inflate small sports equipment:
1. Place the valve connector fully on or into the valve
receptacle on the item. Go to Step 4.
OR
If necessary, use a supplied nozzle adaptor.
2. Choose the appropriate nozzle adaptor, insert the nozzle
adaptor into the valve stem and close the thumb latch.
3. Insert nozzle adaptor into the valve receptacle of the
item.
4. Turn the compressor on and inflate to appropriate
pressure.
WARNING: Fire Hazard
Allow the compressor to cool down for 10 minutes
after each 10 minutes of continuous operation.
5. Turn the compressor off before removing nozzle adaptor
from valve stem.
6. Remove nozzle adaptor from valve connector and store
in storage compartment.
: Leave the thumb latch in the open position for
Note
storing to relieve pressure on the internal mechanism.
cannot be used to inflate
975-0057-01-01