Xantrex XPower 600HD Owner's Manual
  1. Manuals
  2. Brands
  3. Xantrex Manuals
  4. Power Pack
  5. XPower Powerpack 600HD
  6. Owner's manual

Xantrex XPower 600HD Owner's Manual

Xantrex technology xpower powerpack 600hd owner's guide
Hide thumbs Also See for XPower 600HD:
Table of Contents

Advertisement

Quick Links

by
6 00HD
XPower Powerpack
Owner's Guide

Advertisement

Table of Contents
loading

Related Manuals for Xantrex XPower 600HD

Summary of Contents for Xantrex XPower 600HD

  • Page 1 6 00HD XPower Powerpack Owner's Guide...
  • Page 2 XPower Powerpack 600HD Owner’s Guide...
  • Page 3 Trademarks XPower Powerpack 600HD is a trademark of Xantrex International. Xantrex is a registered trademark of Xantrex International. Other trademarks, registered trademarks, and product names are the property of their respective owners and are used herein for identification purposes only.

  • Page 4: About This Guide

    Purpose The purpose of this Owner’s Guide is to provide explanations and procedures for installing, operating, maintaining, and troubleshooting the XPower Powerpack 600HD. The Guide provides safety guidelines, detailed planning and setup information, as well as information about operating and troubleshooting the unit.

  • Page 5: Related Information

    About This Guide Related Information You can find more information about Xantrex Technology Inc. as well as its products and services at www.xantrex.com. 975-0213-01-01...

  • Page 6: Important Safety Instructions

    Important Safety Instructions The XPower Powerpack 600HD generates a type of AC power similar to a normal household wall outlet. Operating the XPower Powerpack incorrectly or misusing it may damage the equipment or create hazardous conditions for the user. Important: Before using your XPower Powerpack, be sure to read and save these safety instructions.
  • Page 7 Safety WARNING: Explosion hazard Do not use this product where there are flammable fumes or gases, such as in the bilge of a gasoline-powered boat, or near propane tanks. Do not use this product in an enclosure containing automotive-type lead acid batteries. These batteries, unlike the sealed AGM battery in XPower Powerpack, vent explosive hydrogen gas which can be ignited by sparks from electrical connections.
  • Page 8 Safety WARNING: Fire hazard The jump-start feature is designed for short term operation only— less than 4 seconds. Operating the jump-start feature for more than 4 seconds may cause damage to the unit. Allow the XPower Powerpack to cool down for at least 3 minutes after each jump- start.
  • Page 9 Safety Precautions When Working With Batteries WARNING: Explosion and fire hazard 1. Follow all instructions published by the battery manufacturer and the manufacturer of the equipment in which the battery is installed. 2. Make sure the area around the battery is well ventilated. 3.
  • Page 10 10. If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters your eyes, immediately flood them with running cold water for at least twenty minutes and get medical attention immediately. 11. Keep a supply of baking soda on hand in the area of the batteries.
  • Page 11 viii...

  • Page 12: Table Of Contents

    1 Introduction About the XPower Powerpack 600HD - - - - - - - - - - - - - - - - - - - 1 Comprehensive Protection - - - - - - - - - - - - - - - - - - - - - - - - - - - 1...
  • Page 13 Battery Maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25 Recharging the XPower Powerpack 600HD Battery- - - - - - - - - 26...

  • Page 14: Introduction

    About the XPower Powerpack 600HD Easy-to-use and designed for years of reliable service, the XPower Powerpack 600HD can run many AC appliances and 12 V DC appliances whenever you need power for work or play, at home or on the road.

  • Page 15: Low Battery Protection

    Comprehensive Protection Low Battery Protection Low battery protection protects the internal battery from excessive discharge and possible damage. When the AC outlet when the internal battery is nearly discharged (11.0 V DC) and the unit turns off at 10.5 V DC. Jump-Start Cables Safety Feature The XPower Powerpack comes with a user-replaceable 250 A fuse to protect the unit and vehicle battery from...

  • Page 16: Features

    Features Chapter 2 describes the main features of the XPower Powerpack 600HD. We recommend that you familiarize yourself with these features before operating the unit. Materials List Your XPower Powerpack package includes these items: ❐ XPower Powerpack ❐ Owner’s Guide ❐...

  • Page 17: Xpower Powerpack 600Hd Features

    XPower Powerpack 600HD Features XPower Powerpack 600HD Features Front Panel Detail Front Panel Features Feature Description Display Function button, when pressed, allows for reading Battery Charge status on the Digital Display. Toggles Digital Display’s power Output Power (W) light illuminates (green) when Output Power information is displayed on the Digital Display.
  • Page 18 AC charger is the 3 AC unplugged from the outlets wall AC outlet. 975-0213-01-01 XPower Powerpack 600HD Features switch illuminates when the Required Action No action required. The digital display will show the AC power drawn from the...
  • Page 19 XPower Powerpack 600HD Features Required How to... Condition Monitor Inverter’s battery switch is turned to charging status All appliances must be disconnected from the AC and DC power outlets; switch of the incandescent light must be turned to The AC charger must...

  • Page 20: Am/Fm Radio With Digital Alarm Clock

    Radio and Clock Features Feature Description FM antenna Frequency indicator light Power Time set button Tuning dial Hours set button Minutes set button Volume dial Alarm set button Alarm clock AM band button/ FM band button/ 975-0213-01-01 XPower Powerpack 600HD Features button button...
  • Page 21 XPower Powerpack 600HD Features Radio and Clock Operation Required How to... Condition Listen to the radio Set the Turn off the clock radio to show the time. Set the Turn off the alarm radio to show the time. Use the...

  • Page 22: Left Side View

    975-0213-01-01 XPower Powerpack 600HD Features Power 12 V DC auto, RV or marine appliances Recharge XPower Powerpack from a 12 V outlet in a vehicle using the DC Charging Cable.

  • Page 23: Accessories

    XPower Powerpack 600HD Features Accessories Feature Description AC Charger lets you recharge the XPower Powerpack from a standard AC wall outlet and can only be used to recharge the internal battery of the XPower Powerpack. Can be stored in AC charger compartment.

  • Page 24: Operation

    Operation Chapter 3 explains how to operate the XPower Powerpack 600HD efficiently. This chapter covers: • Recharging the XPower Powerpack for first time use • Using the built-in light • Operating AC appliances and 12 V DC appliances • Jump-starting a vehicle’s engine •...

  • Page 25: Choosing A Location

    Choosing a Location Choosing a Location WARNING: Fire or explosion The XPower Powerpack contains components that tend to produce arcs or sparks. To prevent fire or explosion, do not operate the XPower Powerpack in compartments containing batteries or flammable materials, or in locations that require ignition-protected equipment.

  • Page 26: Using Xpower Powerpack 600Hd For The First Time

    XPower Powerpack. If, after 35 hours of charging, the green Charging Status light is still flashing, continue to charge the unit for another 15 hours. 975-0213-01-01 Using XPower Powerpack 600HD for the First Time switch to...

  • Page 27: Using The Light

    Using the Light Important: If you keep the XPower Powerpack in storage, the battery will discharge over time. Remember to recharge the battery every three months to keep the XPower Powerpack operational. Note Once fully charged, the charging current automatically reduces to a maintenance charge mode, and the XPower Powerpack may be left permanently connected to the AC Charger.

  • Page 28: Run Time On Typical Ac Appliances

    Run Time on Typical AC Appliances Note The fewer watts an AC appliance uses, the longer the XPower Powerpack will operate before recharging is required. Typical AC appliances that can be used on the XPower Powerpack are listed in Table 3-1. Table 3-1 AC Appliances and Run Times AC-powered Products Cordless telephone...

  • Page 29: Trouble Appliances

    Operating AC Appliances Trouble Appliances CAUTION The output of the inverter is non-sinusoidal. Some equipment may be damaged by the inverter’s modified sine wave output (non- sinusoidal). Some appliances, including the types listed below, may be damaged if they are connected to the inverter: •...

  • Page 30: Operating An Ac Appliance

    Operating an AC Appliance Before operating your AC appliance, ensure that the battery of the XPower Powerpack is fully charged. See “Recharging with the AC Charger” on page 13 for details. To operate an AC appliance: 1. Turn the AC outlet The switch illuminates to indicate AC power is available at the AC outlets.

  • Page 31: Operating 12 V Dc Appliances

    Operating 12 V DC Appliances Operating 12 V DC Appliances The XPower Powerpack can operate 12 V DC auto, RV, marine, or other portable appliances that draw 12 A or less from a 12 V DC power outlet or from a vehicle’s lighter socket.
  • Page 32 To operate a 12 V DC appliance: 1. Open the protective cover on the left side of the XPower Powerpack. 2. Plug the 12 V DC appliance into the DC power socket on the left side of the unit, and turn the 12 V DC appliance on (if required).

  • Page 33: Jump-Starting A Vehicle's Engine

    Jump-Starting a Vehicle’s Engine Jump-Starting a Vehicle’s Engine You can use the XPower Powerpack with the supplied jump- start cables to jump-start a vehicle or boat engine that has a 12 V starting battery. WARNING: Fire hazard Never allow red and black clamps to touch each other or another common metal conductor.
  • Page 34 (–) clip from the vehicle’s battery terminal. 9. Remove the cables from the jump-start cable port. Important: Recharge the XPower Powerpack as soon as possible after each use. See “Recharging the XPower Powerpack 600HD Battery” on page 26. 975-0213-01-01 Jump-Starting a Vehicle’s Engine...

  • Page 35: Using The Radio

    Using the Radio Using the Radio For information about operating the radio, see page 7. Power Draw The AM/FM radio on the back panel is powered by the internal battery in the XPower Powerpack. When turned on, the radio draws 30 mA, allowing you to use the radio for more than one month when the XPower Powerpack is fully charged.
  • Page 36 WARNING: Fire hazard Jump-start cable clamps must be connected positive to positive (red clamp to battery “+”) and negative to negative (black clamp to battery “–”). A reverse polarity connection (positive to negative) may cause damage to the unit and/or create a sparking/explosion hazard.
  • Page 37 Connecting to an External Battery To disconnect the cables from an external battery and from the XPower Powerpack: 1. To disconnect the XPower Powerpack from the external battery when the external battery is discharged or no longer needed, remove the red positive (+) clip, and then remove the black negative (–) clip.

  • Page 38: Maintenance

    Routine maintenance is required to keep your XPower Powerpack 600HD operating properly. Occasionally clean the exterior of the unit with a damp cloth to remove the accumulated dust and dirt.

  • Page 39: Recharging The Xpower Powerpack 600Hd Battery

    Recharging the XPower Powerpack 600HD Battery CAUTION Due to inherent self-discharge, lead acid batteries must be charged at least every 3 months, especially in a warm environment. Leaving a battery in a discharged state, or not recharging every 3 months, may result in permanent battery damage and poor jump-starting performance.

  • Page 40: Recharging With The Ac Charger

    XPower Powerpack may be left permanently connected to the AC charger. If your utility power is interrupted, the charging process automatically restarts when power returns. 975-0213-01-01 Recharging the XPower Powerpack 600HD Battery switch to...

  • Page 41: Recharging With The Dc Charging Cable

    Recharging the XPower Powerpack 600HD Battery Recharging with the DC Charging Cable Using the DC charging cable, the XPower Powerpack can be recharged while you drive your vehicle. Important: Although the charge regulation circuitry in the XPower Powerpack does not operate with this charging method, most vehicle voltage regulators will ensure that the XPower Powerpack is not overcharged.
  • Page 42 XPower Powerpack has been disconnected from all appliances and all charging sources for 15 minutes. Important: Do not leave the XPower Powerpack permanently connected to the vehicle’s lighter socket or 12 V accessory outlet. 975-0213-01-01 Recharging the XPower Powerpack 600HD Battery...

  • Page 43: Recharging With A Generator's Regulated 12 V Dc Outlet

    Recharging the XPower Powerpack 600HD Battery Recharging with a Generator’s Regulated 12 V DC Outlet WARNING: Fire and explosion hazard The generator output must be intended for battery charging and have an output of 15 V or less. An unregulated output or one that exceeds 15 V DC can damage the battery.
  • Page 44 Powerpack charges automatically just as with the AC charger. See “Recharging with the AC Charger” on page 27. It takes about ten hours in direct sunlight to recharge the XPower Powerpack from a 2.5 A solar panel. 975-0213-01-01 Recharging the XPower Powerpack 600HD Battery...

  • Page 45: Replacing The Incandescent Light

    Replacing the Incandescent Light Replacing the Incandescent Light To replace the light bulb: 1. Turn the light switch off. 2. Pop out the plastic lens cover. 3. Gently grasp the bulb and twist clockwise to unscrew the bulb. 4. Insert a replacement bulb of the same type and rating into the light reflector assembly.

  • Page 46: Troubleshooting

    Troubleshooting Troubleshooting will help you identify the common problems than can occur with the XPower Powerpack 600HD. Read this chapter before calling Customer Service. If you cannot solve the problem with the XPower Powerpack, record the information asked for on “Information About Your System”...

  • Page 47: Troubleshooting Reference

    Troubleshooting Reference • Try a different TV. Different models vary considerably in their susceptibility to interference. Troubleshooting Reference WARNING: Electric shock hazard Do not remove the cover of the XPower Powerpack or disassemble the XPower Powerpack except to replace the internal battery or 250 A fuse.
  • Page 48 Table 5-1 Troubleshooting reference Problem Possible Cause AC appliance Battery has discharged will not to 10.5 V. operate; audible alarm is sounding. Inverter has overheated due to poor ventilation or excessively warm environmental conditions. Over- Inverter has temperature overheated due to poor shutdown ventilation or excessively warm...
  • Page 49 Troubleshooting Reference Table 5-1 Troubleshooting reference Problem Possible Cause Measured AC Use of an output voltage average-reading AC is too low. voltmeter to read output voltage. Battery is almost fully discharged. Charging No AC power at the Status light is AC wall outlet.
  • Page 50 Table 5-1 Troubleshooting reference Problem Possible Cause Green The voltage at the AC Charging wall outlet is less than Status light is 120 V AC. still flashing and hasn’t changed to steady after 50 hours of charging. The engine XPower Powerpack being jump- battery is not fully started will not...

  • Page 52: Electrical Specifications

    Specifications Electrical Specifications 12 V DC Section Internal battery type Internal battery voltage (nominal) Internal battery capacity (minimum) Internal battery CCA rating DC power socket (maximum continuous load) Built-in incandescent light (replaceable) Jump-start cable port Jump-start fuse (external—user replaceable, replacement part # 066-0191) sealed, AGM (Absorbed Glass Mat) lead acid 12 V DC...
  • Page 53 Electrical Specifications AC Power Section Output power • Continuous output power • Five minute AC output power • AC output surge capacity Output voltage Output frequency Output wave form No load current draw Input voltage range Low battery alarm Low battery shutdown High battery voltage shutdown Over temperature shutdown Overload shutdown...

  • Page 54: Physical Specifications

    Radio AM Frequency FM Frequency Accessories Jump-start cables (replacement part # 449-0207-01-01) DC charge cable (replacement part # 449-0187-01-01) AC charger (replacement part # 074-1004-01) Physical Specifications Depth Width Height Weight Important: All specifications are subject to change without notice. 975-0213-01-01 Physical Specifications 526–1606 KHz...

  • Page 56: Warranty And Return

    Technology Inc. ("Xantrex") and covers defects in workmanship and materials in your XPower Powerpack 600HD. This warranty period lasts for 6 months from the date of purchase at the point of sale to you, the original end user customer. You require proof of purchase to make warranty claims.
  • Page 57 Warranty and Return What proof of purchase is required? In any warranty claim, dated proof of purchase must accompany the product and the product must not have been disassembled or modified without prior written authorization by Xantrex. Proof of purchase may be in any one of the following forms: •...
  • Page 58 IN CONNECTION WITH LIFE SUPPORT SYSTEMS OR OTHER MEDICAL EQUIPMENT OR DEVICES. Please note that the XPower Powerpack 600HD is not intended for use as an uninterruptible power supply and Xantrex makes no warranty or representation in connection with any use of the product for such purposes.

  • Page 59: Return Material Authorization Policy

    This warranty will not apply where the product is damaged due to improper packaging. 2. Include the following: • The RMA number supplied by Xantrex Technology Inc. clearly marked on the outside of the box. • A return address where the unit can be shipped. Post office boxes are not acceptable.

  • Page 60: Out Of Warranty Service

    Warranty and Return Out of Warranty Service If the warranty period for your XPower Powerpack 600HD has expired, if the unit was damaged by misuse or incorrect installation, if other conditions of the warranty have not been met, or if no dated proof of purchase is available, your unit may be serviced or replaced for a flat fee.

  • Page 61: Information About Your System

    Warranty and Return Information About Your System As soon as you open your XPower Powerpack 600HD package, record the following information and be sure to keep your proof of purchase. ❐ Serial Number ❐ Purchased From ❐ Purchase Date If you need to contact Customer Service, please record the following details before calling.
  • Page 62 t 1-800-394-0440 (toll free in North America) 1-360-925-5097 (direct) f 1-360-925-5143 e CustomerService@xantrex.com www.xantrex.com 975-0213-01-01 REV. A Printed in China...

Table of Contents