Recharging With The Ac Charger - Xantrex XPower 400 Owner's Manual

Recharging with the AC Charger

975-0057-01-01
Get user manuals: See SafeManuals.com
Recharging with the AC Charger is a true "plug-in-and-
forget" charging method.
CAUTION
Do not operate AC or DC appliances while the
XPower Powerpack
Charger.
The AC Charger may be permanently damaged if
AC appliances or 12 V DC appliances are operated
while the AC Charger is connected.
To recharge with the AC Charger:
1. Disconnect any 12 V DC appliance and turn the light
switch to Off.
2. Turn the AC Outlet On/Off switch to Off.
3. Plug the AC Charger into a standard AC wall outlet.
4. Insert the AC Charger cable end into the Charger Input
Socket located in the charger storage compartment.
5. While the XPower Powerpack
Charging Status light is flashing. If the battery is
completely discharged, a typical recharge may take up to
35 hours. When fully charged, the green Charging
Status light changes to steady and the
Powerpack is ready to use.
The 35-hour charging time for the
Important:
Powerpack assumes that there is 120 V at the AC wall
outlet. If the voltage is less than 120 V AC, it may take more
than 35 hours to fully recharge the
after 35 hours of charging, the green Charging Status light
is still flashing and not steady, continue to charge the unit
for another 15 hours.
Recharging the XPower Powerpack Battery
is being recharged with the AC
is recharging, the green
XPower
XPower
XPower
Powerpack. If,
4-3