Xantrex XPower 400 Owner's Manual page 35

975-0057-01-01
Get user manuals: See SafeManuals.com
Typical 12 V DC appliances that can be used on the
Powerpack are listed in
Table 3-2 12 V DC Appliances and Run Times
12 V DC Appliance
5 W incandescent light (built
into the unit)
c
Cellular telephone
Stereo/CD player
Portable Cooler
a. Represents actual power consumption as measured on sample
appliances.
b. Operating times assume a fully charged 20 Ah battery and may vary
based on model or brand of appliance.
c. Represents talks time available from 10 recharge cycles.
To operate a 12 V DC appliance:
1. Open the protective cover on the left side of the
Powerpack.
2. Plug the 12 V DC appliance into the DC power socket on
the left side of the unit, and turn the 12 V DC appliance
on (if required).
If the 12 V DC appliance draws more than 12 A (or has a
short-circuit defect), the internal circuit breaker of the
XPower Powerpack
appliance. If this occurs, unplug the 12 V DC appliance,
and the internal circuit breaker automatically resets after
a few seconds.
3. Fully recharge the
possible after each use.
As the DC power socket is internally wired directly to the
internal battery, extended operation of a 12 V DC
appliance may result in excessive battery discharge. See
Caution for "Equipment damage" on page
Operating 12 V DC Appliances
Table 3-2.
a
Watts
5
6
10
30
shuts off the power to the 12 V DC
XPower Powerpack
XPower
b
Hours
30
30
17
4
XPower
as soon as
3–8.
3-9