Xantrex XPower 400 Owner's Manual page 51

975-0057-01-01
Get user manuals: See SafeManuals.com
To recharge the XPower Powerpack
the DC Charging Cable:
1. While the vehicle engine is running, plug one end of the
DC Charging Cable into the DC Power Socket of the
XPower Powerpack.
2. Plug the opposite end of the DC Charging Cable into the
vehicle's lighter socket or 12 V accessory outlet.
3. Once the XPower Powerpack
vehicle's engine is not running, disconnect the DC
Charging Cable from both sockets.
Most of the XPower
restored in four hours while the vehicle engine is
running.
: The green Charging Status light will not illuminate
Note
when the XPower Powerpack
Charging Cable.
: Battery Charge (%) indicator is only accurate when
Note
the XPower Powerpack
appliances and all charging sources for fifteen minutes.
Do not leave the
Important:
permanently connected to the vehicle's lighter socket or
12 V accessory outlet.
Recharging the XPower Powerpack Battery
while you drive using
is fully charged or if your
Powerpack's capacity will be
is recharged through the DC
has been disconnected from all
XPower Powerpack
4-5