Operating Several Appliances At Once; Operating An Ac Appliance - Xantrex XPower 400 Owner's Manual

Operating Several Appliances at Once

Operating an AC Appliance

975-0057-01-01
Get user manuals: See SafeManuals.com
You can run several AC appliances if the total rating of all the
appliances (in watts) does not exceed 320 W. You can run
appliances using an AC power bar.
Run time, however, will decrease accordingly with the
number of appliances being operated and the AC power being
consumed.
Before operating your AC appliance, ensure that the battery
of the XPower Powerpack
with the AC Charger" on page 3–3
To operate an AC appliance:
1. Open the protective covering on the right side of the
XPower Powerpack. Turn the AC Outlet On/Off switch
to the On position.
The switch illuminates to indicate AC power is available
at the AC Outlets.
2. Plug the AC appliance into one of the AC Outlets and
turn the appliance on.
most devices rated up to 320 W.
3. Recharge the XPower Powerpack
after each use.
When using the
appliance and the low battery warning sounds, the
warning gives you time to shut your AC appliance off
before loss of AC power.
If you ignore the warning, the
automatically turns off a few minutes later to prevent
battery damage.
In the event of an overload, low battery voltage or
overheating, the
down.
Operating AC Appliances
is fully charged. See
for details.
XPower Powerpack
as soon as possible
XPower Powerpack
XPower Powerpack
XPower Powerpack
"Recharging
will operate
to operate an AC
automatically shuts
3-7