Specifications; General; Performance - bioMerieux PREVI Color Gram User Manual

General

Specifications

S p e c i f i c a t i o n s
G e n e r a l
P e r f o r m a n c e
*
**
2-2
PARAMETERS
Main power input
Power Consumption
Fuse rating
Outside dimensions
Width
Depth
Height
- Lid open
Height -
Lid closed
Weight
Ambient temperature
Operation
Storage
Relative humidity
Altitude
Pollution degree
Over-voltage category
PARAMETERS
Reagent spray nozzles
Reagent channel
Carousel capacity
Run
Rotor speeds
Not provided by bioMerieux. Since distilled water and ethanol or methanol are not available
from bioMérieux, it must be obtained locally. Water should be filtered (0.2 micron inline filter)
to remove bacteria and particulates.
Ethanol or methanol should be 99.8% pure.
CHARACTERISTICS
100 – 240 V~ / 50 - 60 Hz
The power setting is indicated on the back panel.
85 W max
2A-250V ~ IEC TYPE T
5x20 mm (0.2x7.9 inches)
560 mm (22 inches)
530 mm (21 inches)
580 mm (23 inches)
240 mm (9.5 inches)
16.8 kg (37 lbs)
15 °C to 30 °C (59 °F to 95 °F)
- 20 °C to 60 °C (- 4 °F to 140 °F)
maximum 80% at up to 31 °C
≤ 2000 m
2
II
CHARACTERISTICS
Each reagent has a separate spray nozzle
to dispense the correct amount of reagent.
A - Fuchsin or Safranin (with or without acetone)
B - Iodine
C - Crystal Violet
D - Distilled water *
E - Ethanol or methanol **
12 slides
30 slides
9 operator-selected decolorizer cycles
(Program no.2 and no.3 validated by bioMérieux)
20 rpm for staining (rpm - revolutions per minute)
950 rpm for drying
PREVI™ Color Gram User's Manual