Preparation Procedure; Nozzle Checking - bioMerieux PREVI Color Gram User Manual

P r e p a r a t i o n p r o c e d u r e
IMPORTANT!
CAUTION!
WARNING!
N o z z l e c h e c k i n g
Remove each spray
nozzle with the nozzle
tool by turning the
counter clockwise.
Note the location of
each nozzle so you
can return it to the
original location.
Hold a sheet of white
paper in front of
the nozzle A.
Press and hold each
prime button.
Stain should appear
within 5 seconds.
If this is the case:
go to step 6.
If not, immediately
stop the procedure
and
see "Unclogging the
tubing", page 5-8.
PREVI™ Color Gram User's Manual
To obtain optimum performance, thoroughly purge and prime each reagent
delivery line using the following instructions.
This procedure must be applied before the 1
Never operate a dry pump for more than 10 seconds.
Installing the PREVI™Color Gram

Preparation procedure

st
use of the instrument.
3-5