Two-Post Rack Mount - Extreme Networks ExtremeSwitching 5720 Series Hardware Installation Manual

Two-Post Rack Mount

Figure 31: Inserting the Switch into the Front of the Rack
To install the switch in the rear of the rack, slide the switch into the outer rails in the rear of the rack.
Figure 32: Inserting the Switch into the Rear of the Rack
Secure the switch to the rack using the thumb screws on the mounting ears.
Figure 33: Secure the Switch with Thumb Screws
Two-Post Rack Mount
You can attach your switch to a two-post rack in either of two configurations:
•
Front mount
60 ExtremeSwitching 5720 Series Hardware Installation Guide
Install Your Switch