Two-Post Rack Mount - Extreme Networks Extreme 7520 Series Hardware Installation Manual

Install the Switch
Figure 23: Front Installation: Inserting the Device
To install the device in the rear of the rack, slide the device into the outer rails in the
rear of the rack.
Figure 24: Rear Installation: Inserting the Device
Secure the device to the rack using the thumb screws on the mounting ears.
Figure 25: Secure the Device

Two-Post Rack Mount

You can attach the switch to a two-post rack in either of two configurations:
•
Front mount
Extreme 7520 Hardware Installation Guide
Two-Post Rack Mount
57