Extreme Networks ExtremeSwitching 5720 Series Hardware Installation Manual page 81

Replace Internal AC Power Supplies
Figure 49: Installing an ExtremeSwitching 2000 W AC Power Supply
7. Push the power supply in until the latch snaps into place.
8. Connect the power cord to the power supply and to a grounded AC power outlet.
9. If the power supply is equipped with a power cord retainer, use the retainer to secure the power cord
to the power supply.
Caution
Do not slam the power supply into the switch.
Warning
Always be sure that the source outlet is properly grounded before plugging the AC power
cord into the AC power supply.
ExtremeSwitching 5720 Series Hardware Installation Guide
Replace a 2000 W AC Power Supply
81