Power Supplies For Use With Your Switch; 715 W Ac Power Supplies; 1100 W Ac Power Supplies - Extreme Networks ExtremeSwitching 5720 Series Hardware Installation Manual

Power Supplies for Use with Your Switch

715 W AC Power Supplies

1100 W AC Power Supplies

2000 W AC Power Supply
Each 5720 Series switch operates with two replaceable internal power supply units that provide all of
the power needed for the switch to operate. The power supply units must be a matched pair with the
same power rating, such as 750W, for long term use. You can remove one power supply without
interrupting the switch's operation. The 5720 Series can support an unmatched pair of power supply
units when you are upgrading or downgrading to matched pair with a different power rating.
Power supplies are ordered separately.
715 W AC Power Supplies
The 715 W AC PSU-FB (model XN-ACPWR-715W-FB with front-to-back ventilation airflow) is
compatible with all 5720 Series switch models.
The 715 W AC power supply has a keyed power inlet (C16) that requires a notched (C15) power cord.
The 715 W AC power supply has the status LEDs listed in the following table:
Table 5: 715 W AC Power Supply LED Status Indications
IN_OK
(Green)
Off
On
On
On
1100 W AC Power Supplies
The 1100 W AC PSU-FB (model XN-ACPWR-1100W-FB with front-to-back ventilation airflow) is
compatible with all 5720 Series switch models.
The 1100 W AC power supply has a keyed power inlet (C16) that requires a notched (C15) power cord.
on page 19
on page 19
on page 20
OUT_OK Description
(Green or Red)
Off No AC input power connection or low AC voltage.
Off AC input good, 54V output disabled.
(Red) On AC input good, output (54V) fault.
(Green) On AC input good.
ExtremeSwitching 5720 Series Hardware Installation Guide 19