Replace A 2000 W Ac Power Supply - Extreme Networks ExtremeSwitching 5720 Series Hardware Installation Manual

Replace Internal AC Power Supplies
Figure 47: Installing an 1100 W AC Power Supply
7. Push the power supply in until the latch snaps into place.
8. Connect the power cord to the power supply and to a grounded AC power outlet.
9. If the power supply is equipped with a power cord retainer, use the retainer to secure the power cord
to the power supply.

Replace a 2000 W AC Power Supply

The ExtremeSwitching 2000 W AC power supply with part number XN-ACPWR-2000W-FB is
compatible with all 5720 Series models.
These switches have two bays for hot-swappable power supplies. In a switch with a redundant power
configuration, you can replace one AC power supply without powering down the switch.
You need the following tools and materials to replace a 2000 W AC power supply:
•
Thermal protective gloves
•
AC power cord, if you will not be re-using the cord from the removed power supply
Caution
Do not slam the power supply into the switch.
Warning
Always be sure that the source outlet is properly grounded before plugging the AC power
cord into the AC power supply.
ExtremeSwitching 5720 Series Hardware Installation Guide
Replace a 2000 W AC Power Supply
79