Table of Contents
Advertisement
Four-Post Rack Mount
Figure 27: Attaching the Outer Rail to the Rack
3. Attach the inner rail to a side of the switch using the M4 screws.
Figure 28: Attaching the Inner Rail to a Side of the Switch
4. Install the switch in the rack.
a. To install the switch in the front of the rack, attach a mounting bracket (ear) to a side of the
switch, using #6-32 screws, so that the mounting ear is flush with the front of the rack.
58
ExtremeSwitching 5720 Series Hardware Installation Guide
Install Your Switch
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeSwitching 5720 Series and is the answer not in the manual?