Menu 3 - Measuring Functions - Siemens SITRANS FUS060 Operating Instructions Manual

Menu Device function,
code
Parameters
2.4.3 Digital outp 2
2.4.4 Analog output
* Active errors will affect the output functions, see menus 2.1 and 2.2.
C.1.3

Menu 3 - Measuring functions

Menu Device function,
code
Parameters
3.1 Flow
3.1.1 Unit
3.1.2 Max. vol. flow
3.1.3 Limits
3.1.3.1 Lo alarm limit
3.1.3.2 Hi alarm limit
3.1.3.3 Hysteresis
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL
Description
Simulation of output signal for digi‐
tal output 2 (relay) with selected val‐
ue
Simulation of output current of ana‐
logue output with selected value
Description
Physical units for volume flow, mass
flow
Note: Whenever using mass flow,
the actual density must be entered in
menu 3.1.4
Full scale value
Note: Corresponds to 20 mA value
(menu 4.1) and selected "Full scale
frq" (menu 4.2.5)
Flow unit according to menu 3.1.1
Lower alarm limit (< Hi alarm limit)
Upper alarm limit (< Lo alarm limit)
Hysteresis for limit in % of full scale
value
C.1 Menu items (FW Rev. 4.00.00-15)
Factory setting Setting options
End End (no simulation)
Relay on
Relay off
4 mA 4 mA
10 mA
12 mA
20 mA
Error signal
Factory setting Setting options
m /h l/s, l/min, l/h, m
3
m
3
ft /s, ft
3
gal/s, gal/min, gal/d,
Mgal/d, ImpGal/s, Im‐
pGal/min, ImpGal/d,
g/s, g/min, g/h, kg/s,
kg/min, kg/d, Ton/
min, Ton/h, Ton/d,
lb/s, lb/min, lb/h,
lb/d, STon/min,
STon/h, STon/d
Depends on sensor See dimension table
size in sensor manual
Setting range:
0.000075 ... Qmax
m
3
Qmax =π×r
r=pipe diameter/2
(pipe diameter de‐
fined in menu code
7.1.3.1.2)
Depends on sensor See dimension table
size in sensor manual
Depends on sensor See dimension table
size in sensor manual
1 % 0 % to 20 %
HMI menu structure
Read /
Write
Write
Write
Read /
Write
/s, Write
3
/h, m /d, Ml/d,
3
/min, ft /d,
3 3
Write
/s
2 ×12 m/s,
Write
Write
Write
107