Configuration - Siemens SITRANS FUS060 Operating Instructions Manual

Commissioning
6.4 Commissioning via SIMATIC PDM
Among other features, SIMATIC PDM contains a simple process for monitoring process values,
interrupts and status/diagnosis signals of a field device.
Note
For instructions on installation and operation of SIMATIC PDM, refer to the SIMATIC PDM Getting
Started (included in the documentation package that comes with PDM).
Note
Minimum PDM version required is SIMATIC PDM V6.0 + SP5
6.4.1

Configuration

Figure 6-5
Note
Special characters
Some special characters are not supported via the SIMATIC PDM communication. In case of
uploading such into the FUS060 a "?" is displayed instead. A "Ü" is changed to "ü" in the device
display.
44
FUS060 HART via SIMATIC PDM (example)
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL